Lowongan Kerja SUPERVISOR PROCESS MAINTENANCE CONTROL AND INSTRUMENTATION di PT Amman Mineral Nusa Tenggara Sumbawa Barat NTB

26 Januari 2026

- Jangan lupa Share informasi ini ke keluarga/saudara/teman/tetangga

- Klik pada Gambar untuk Memperjelas/Memperbesar Tampilan

SUPERVISOR PROCESS MAINTENANCE CONTROL AND INSTRUMENTATION

KAB. SUMBAWA BARAT, NUSA TENGGARA BARAT

Diposting 14 hari yang lalu • Jumlah lowongan: 1

Batas waktu lamaran 12 Februari 2026

Bidang pekerjaan

Bagian Umum

Jenis pekerjaan

Full time

Tipe pekerjaan

Lowongan dalam negeri

Jenis kelamin

Laki-laki / Perempuan

Rentang gaji

Dirahasiakan

Deskripsi Pekerjaan

Some of your duties will include:

To supervise and lead the instrumentation and control maintenance activities within the processing plant, ensuring maximum equipment reliability, safe operation, and compliance with company standards. This includes preventive and corrective maintenance of field instrumentation, DCS/PLC/SCADA systems, analyzers, and related control systems critical to continuous mineral processing operations (e.g., crushing, milling, flotation, dewatering).

1. Control & Instrumentation Maintenance Supervision

Supervise daily instrumentation and control maintenance tasks for all plant areas (e.g., Crushing, Grinding, Flotation, Tailings).

Ensure effective troubleshooting, calibration, loop-checking, and repair of transmitters, control valves, actuators, switches, and analytical instruments (pH, ORP, density, flow, etc.).

Ensure availability and functionality of Distributed Control Systems (DCS), PLCs, SCADA, and HMI systems.

Monitor and coordinate resolution of instrumentation and control-related alarms and system faults.

2. Preventive & Predictive Maintenance

Lead implementation of preventive maintenance schedules for instrumentation systems based on OEM recommendations and plant criticality.

Coordinate reliability inspections and predictive diagnostics using vibration, temperature, and loop integrity checks.

3. Planning, Scheduling & Reporting

Support work planning and daily/weekly scheduling in coordination with Maintenance Planning team.

Monitor work orders in CMMS/ERP (e.g., SAP PM) and ensure timely closure with accurate records.

Prepare daily shift reports, incident logs, and performance KPIs for review by Superintendent.

4. Project & Shutdown Support

Participate in instrumentation installation and commissioning for plant expansions and projects.

Supervise instrumentation scope during plant shutdowns and turnarounds, ensuring proper execution and handover.

5. Safety, Compliance, and Continuous Improvement

Enforce safe work practices (LOTO, confined space, work at height, etc.) and support HSE inspections.

Ensure compliance with Indonesian electrical/instrumentation regulations and international standards (ISA, IEC).

Promote continuous improvement in maintenance practices through RCA, FMEA, and 5S/LEAN programs.

6. Team Leadership & Training

Supervise, coach, and develop local instrumentation technicians and apprentices.

Participate in competency assessments and technical training planning for the team.

Support knowledge transfer from OEM/vendor specialists to in-house team.

Persyaratan Khusus

What skills and experience do you need?

Diploma (D3) or Bachelor’s degree (S1) in Electrical Engineering, Instrumentation & Control Engineering, or equivalent.

Certifications (Preferred):

Certified in instrumentation calibration, ISA/IEC standards, or DCS/PLC OEM training (e.g., Siemens, ABB, Rockwell, Emerson); Basic Safety (K3), LOTO, and Permit-to-Work certifications.

Have 8 years of relevant experience in instrumentation & control maintenance, with at least 3 years in a supervisory role. Strong exposure to mineral processing plants or heavy process industries (cement, petrochemical, pulp & paper, etc.).

Hands-on experience with:

Ae3 Process control instrumentation (pressure, flow, level, temperature, etc.)

DCS/PLC/SCADA systems (e.g., Siemens PCS7, ABB 800xA, Yokogawa, Emerson DeltaV)

Analytical instruments (e.g., online particle size analyzer, XRF/XRD, pH meters, etc.)

Calibration tools (HART communicator, loop calibrators, etc.)

Familiar with CMMS/ERP (SAP PM or Maximo); Understanding of P&ID, loop diagrams, electrical/instrumentation drawings;

Strong communication and coordination skills across multi-discipline teams; Ability to lead teams under pressure and shift-based operations; Strong troubleshooting and problem-solving capabilities.

Excellent communication skills in English both verbal and written and computer literate.

Persyaratan Umum

Minimal pendidikan

Sarjana

Status pernikahan

Tidak ada preferensi

Minimal pengalaman

7 tahun

Kondisi fisik

Disabilitas & Non Disabilitas

Keterampilan

Microsoft Office